FLASH_Program

  ******************** (C) COPYRIGHT 2010 STMicroelectronics *******************
  * @file    FLASH/Program/readme.txt 
  * @author  MCD Application Team
  * @version V3.4.0
  * @date    10/15/2010
  * @brief   Description of the FLASH Program Example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   
Example Description

This example provides a description of how to program the STM32F10x FLASH.

After Reset, the Flash memory Program/Erase Controller is locked. To unlock it, the FLASH_Unlock function is used. Before programming the desired addresses, an erase operation is performed using the flash erase page feature. The erase procedure starts with the calculation of the number of pages to be used. Then all these pages will be erased one by one by calling FLASH_ErasePage function.

Once this operation is finished, the programming operation will be performed by using the FLASH_ProgramWord function. The written data is then checked and the result of the programming operation is stored into the MemoryProgramStatus variable.

Directory contents
Hardware and Software environment
How to use it ?

In order to make the program work, you must do the following:

Tip: You can tailor the provided project template to run this example, for more details please refer to "stm32f10x_stdperiph_lib_um.chm" user manual; select "Peripheral Examples" then follow the instructions provided in "How to proceed" section.

Note:
  • Low-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
  • Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
  • Medium-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
  • Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
  • High-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes.
  • High-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes.
  • XL-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 512 and 1024 Kbytes.
  • Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.

© COPYRIGHT 2010 STMicroelectronics

STM32F10x Standard Peripherals Library: Footer

 

 

 

      For complete documentation on STM32(CORTEX M3) 32-bit Microcontrollers platform visit  www.st.com/STM32