TIM_BDTRInitTypeDef Struct Reference
[TIM_Exported_Types]

BDTR structure definition. More...

#include <stm32f10x_tim.h>

Data Fields

uint16_t TIM_AutomaticOutput
uint16_t TIM_Break
uint16_t TIM_BreakPolarity
uint16_t TIM_DeadTime
uint16_t TIM_LOCKLevel
uint16_t TIM_OSSIState
uint16_t TIM_OSSRState

Detailed Description

BDTR structure definition.

Note:
This sturcture is used only with TIM1 and TIM8.

Definition at line 138 of file stm32f10x_tim.h.


Field Documentation

Specifies whether the TIM Automatic Output feature is enabled or not. This parameter can be a value of TIM_AOE_Bit_Set_Reset

Definition at line 160 of file stm32f10x_tim.h.

Referenced by main(), TIM_BDTRConfig(), and TIM_BDTRStructInit().

Specifies whether the TIM Break input is enabled or not. This parameter can be a value of Break_Input_enable_disable

Definition at line 154 of file stm32f10x_tim.h.

Referenced by main(), TIM_BDTRConfig(), and TIM_BDTRStructInit().

Specifies the TIM Break Input pin polarity. This parameter can be a value of Break_Polarity

Definition at line 157 of file stm32f10x_tim.h.

Referenced by main(), TIM_BDTRConfig(), and TIM_BDTRStructInit().

Specifies the delay time between the switching-off and the switching-on of the outputs. This parameter can be a number between 0x00 and 0xFF

Definition at line 150 of file stm32f10x_tim.h.

Referenced by main(), TIM_BDTRConfig(), and TIM_BDTRStructInit().

Specifies the LOCK level parameters. This parameter can be a value of Lock_level

Definition at line 147 of file stm32f10x_tim.h.

Referenced by main(), TIM_BDTRConfig(), and TIM_BDTRStructInit().

Specifies the Off-State used in Idle state. This parameter can be a value of OSSI_Off_State_Selection_for_Idle_mode_state

Definition at line 144 of file stm32f10x_tim.h.

Referenced by main(), TIM_BDTRConfig(), and TIM_BDTRStructInit().

Specifies the Off-State selection used in Run mode. This parameter can be a value of OSSR_Off_State_Selection_for_Run_mode_state

Definition at line 141 of file stm32f10x_tim.h.

Referenced by main(), TIM_BDTRConfig(), and TIM_BDTRStructInit().


The documentation for this struct was generated from the following file:
STM32F10x Standard Peripherals Library: Footer

 

 

 

      For complete documentation on STM32(CORTEX M3) 32-bit Microcontrollers platform visit  www.st.com/STM32