stm32f10x_tim.c File Reference

This file provides all the TIM firmware functions. More...

#include "stm32f10x_tim.h"
#include "stm32f10x_rcc.h"

Go to the source code of this file.

Defines

#define CCER_CCE_Set   ((uint16_t)0x0001)
#define CCER_CCNE_Set   ((uint16_t)0x0004)
#define CCMR_Offset   ((uint16_t)0x0018)
#define SMCR_ETR_Mask   ((uint16_t)0x00FF)

Functions

static void TI1_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI1 as Input.
static void TI2_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI2 as Input.
static void TI3_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI3 as Input.
static void TI4_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI4 as Input.
void TIM_ARRPreloadConfig (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables TIMx peripheral Preload register on ARR.
void TIM_BDTRConfig (TIM_TypeDef *TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
 Configures the: Break feature, dead time, Lock level, the OSSI, the OSSR State and the AOE(automatic output enable).
void TIM_BDTRStructInit (TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
 Fills each TIM_BDTRInitStruct member with its default value.
void TIM_CCPreloadControl (TIM_TypeDef *TIMx, FunctionalState NewState)
 Sets or Resets the TIM peripheral Capture Compare Preload Control bit.
void TIM_CCxCmd (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
 Enables or disables the TIM Capture Compare Channel x.
void TIM_CCxNCmd (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
 Enables or disables the TIM Capture Compare Channel xN.
void TIM_ClearFlag (TIM_TypeDef *TIMx, uint16_t TIM_FLAG)
 Clears the TIMx's pending flags.
void TIM_ClearITPendingBit (TIM_TypeDef *TIMx, uint16_t TIM_IT)
 Clears the TIMx's interrupt pending bits.
void TIM_ClearOC1Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF1 signal on an external event.
void TIM_ClearOC2Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF2 signal on an external event.
void TIM_ClearOC3Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF3 signal on an external event.
void TIM_ClearOC4Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF4 signal on an external event.
void TIM_Cmd (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the specified TIM peripheral.
void TIM_CounterModeConfig (TIM_TypeDef *TIMx, uint16_t TIM_CounterMode)
 Specifies the TIMx Counter Mode to be used.
void TIM_CtrlPWMOutputs (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIM peripheral Main Outputs.
void TIM_DeInit (TIM_TypeDef *TIMx)
 Deinitializes the TIMx peripheral registers to their default reset values.
void TIM_DMACmd (TIM_TypeDef *TIMx, uint16_t TIM_DMASource, FunctionalState NewState)
 Enables or disables the TIMx’s DMA Requests.
void TIM_DMAConfig (TIM_TypeDef *TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
 Configures the TIMx’s DMA interface.
void TIM_EncoderInterfaceConfig (TIM_TypeDef *TIMx, uint16_t TIM_EncoderMode, uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
 Configures the TIMx Encoder Interface.
void TIM_ETRClockMode1Config (TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
 Configures the External clock Mode1.
void TIM_ETRClockMode2Config (TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
 Configures the External clock Mode2.
void TIM_ETRConfig (TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
 Configures the TIMx External Trigger (ETR).
void TIM_ForcedOC1Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 1 waveform to active or inactive level.
void TIM_ForcedOC2Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 2 waveform to active or inactive level.
void TIM_ForcedOC3Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 3 waveform to active or inactive level.
void TIM_ForcedOC4Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 4 waveform to active or inactive level.
void TIM_GenerateEvent (TIM_TypeDef *TIMx, uint16_t TIM_EventSource)
 Configures the TIMx event to be generate by software.
uint16_t TIM_GetCapture1 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 1 value.
uint16_t TIM_GetCapture2 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 2 value.
uint16_t TIM_GetCapture3 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 3 value.
uint16_t TIM_GetCapture4 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 4 value.
uint16_t TIM_GetCounter (TIM_TypeDef *TIMx)
 Gets the TIMx Counter value.
FlagStatus TIM_GetFlagStatus (TIM_TypeDef *TIMx, uint16_t TIM_FLAG)
 Checks whether the specified TIM flag is set or not.
ITStatus TIM_GetITStatus (TIM_TypeDef *TIMx, uint16_t TIM_IT)
 Checks whether the TIM interrupt has occurred or not.
uint16_t TIM_GetPrescaler (TIM_TypeDef *TIMx)
 Gets the TIMx Prescaler value.
void TIM_ICInit (TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct)
 Initializes the TIM peripheral according to the specified parameters in the TIM_ICInitStruct.
void TIM_ICStructInit (TIM_ICInitTypeDef *TIM_ICInitStruct)
 Fills each TIM_ICInitStruct member with its default value.
void TIM_InternalClockConfig (TIM_TypeDef *TIMx)
 Configures the TIMx interrnal Clock.
void TIM_ITConfig (TIM_TypeDef *TIMx, uint16_t TIM_IT, FunctionalState NewState)
 Enables or disables the specified TIM interrupts.
void TIM_ITRxExternalClockConfig (TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource)
 Configures the TIMx Internal Trigger as External Clock.
void TIM_OC1FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 1 Fast feature.
void TIM_OC1Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel1 according to the specified parameters in the TIM_OCInitStruct.
void TIM_OC1NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
 Configures the TIMx Channel 1N polarity.
void TIM_OC1PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 1 polarity.
void TIM_OC1PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR1.
void TIM_OC2FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 2 Fast feature.
void TIM_OC2Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel2 according to the specified parameters in the TIM_OCInitStruct.
void TIM_OC2NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
 Configures the TIMx Channel 2N polarity.
void TIM_OC2PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 2 polarity.
void TIM_OC2PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR2.
void TIM_OC3FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 3 Fast feature.
void TIM_OC3Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel3 according to the specified parameters in the TIM_OCInitStruct.
void TIM_OC3NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
 Configures the TIMx Channel 3N polarity.
void TIM_OC3PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 3 polarity.
void TIM_OC3PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR3.
void TIM_OC4FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 4 Fast feature.
void TIM_OC4Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel4 according to the specified parameters in the TIM_OCInitStruct.
void TIM_OC4PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 4 polarity.
void TIM_OC4PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR4.
void TIM_OCStructInit (TIM_OCInitTypeDef *TIM_OCInitStruct)
 Fills each TIM_OCInitStruct member with its default value.
void TIM_PrescalerConfig (TIM_TypeDef *TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
 Configures the TIMx Prescaler.
void TIM_PWMIConfig (TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct)
 Configures the TIM peripheral according to the specified parameters in the TIM_ICInitStruct to measure an external PWM signal.
void TIM_SelectCCDMA (TIM_TypeDef *TIMx, FunctionalState NewState)
 Selects the TIMx peripheral Capture Compare DMA source.
void TIM_SelectCOM (TIM_TypeDef *TIMx, FunctionalState NewState)
 Selects the TIM peripheral Commutation event.
void TIM_SelectHallSensor (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIMx’s Hall sensor interface.
void TIM_SelectInputTrigger (TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource)
 Selects the Input Trigger source.
void TIM_SelectMasterSlaveMode (TIM_TypeDef *TIMx, uint16_t TIM_MasterSlaveMode)
 Sets or Resets the TIMx Master/Slave Mode.
void TIM_SelectOCxM (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
 Selects the TIM Ouput Compare Mode.
void TIM_SelectOnePulseMode (TIM_TypeDef *TIMx, uint16_t TIM_OPMode)
 Selects the TIMx’s One Pulse Mode.
void TIM_SelectOutputTrigger (TIM_TypeDef *TIMx, uint16_t TIM_TRGOSource)
 Selects the TIMx Trigger Output Mode.
void TIM_SelectSlaveMode (TIM_TypeDef *TIMx, uint16_t TIM_SlaveMode)
 Selects the TIMx Slave Mode.
void TIM_SetAutoreload (TIM_TypeDef *TIMx, uint16_t Autoreload)
 Sets the TIMx Autoreload Register value.
void TIM_SetClockDivision (TIM_TypeDef *TIMx, uint16_t TIM_CKD)
 Sets the TIMx Clock Division value.
void TIM_SetCompare1 (TIM_TypeDef *TIMx, uint16_t Compare1)
 Sets the TIMx Capture Compare1 Register value.
void TIM_SetCompare2 (TIM_TypeDef *TIMx, uint16_t Compare2)
 Sets the TIMx Capture Compare2 Register value.
void TIM_SetCompare3 (TIM_TypeDef *TIMx, uint16_t Compare3)
 Sets the TIMx Capture Compare3 Register value.
void TIM_SetCompare4 (TIM_TypeDef *TIMx, uint16_t Compare4)
 Sets the TIMx Capture Compare4 Register value.
void TIM_SetCounter (TIM_TypeDef *TIMx, uint16_t Counter)
 Sets the TIMx Counter Register value.
void TIM_SetIC1Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 1 prescaler.
void TIM_SetIC2Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 2 prescaler.
void TIM_SetIC3Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 3 prescaler.
void TIM_SetIC4Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 4 prescaler.
void TIM_TimeBaseInit (TIM_TypeDef *TIMx, TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct)
 Initializes the TIMx Time Base Unit peripheral according to the specified parameters in the TIM_TimeBaseInitStruct.
void TIM_TimeBaseStructInit (TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct)
 Fills each TIM_TimeBaseInitStruct member with its default value.
void TIM_TIxExternalClockConfig (TIM_TypeDef *TIMx, uint16_t TIM_TIxExternalCLKSource, uint16_t TIM_ICPolarity, uint16_t ICFilter)
 Configures the TIMx Trigger as External Clock.
void TIM_UpdateDisableConfig (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or Disables the TIMx Update event.
void TIM_UpdateRequestConfig (TIM_TypeDef *TIMx, uint16_t TIM_UpdateSource)
 Configures the TIMx Update Request Interrupt source.

Detailed Description

This file provides all the TIM firmware functions.

Author:
MCD Application Team
Version:
V3.4.0
Date:
10/15/2010

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

© COPYRIGHT 2010 STMicroelectronics

Definition in file stm32f10x_tim.c.

STM32F10x Standard Peripherals Library: Footer

 

 

 

      For complete documentation on STM32(CORTEX M3) 32-bit Microcontrollers platform visit  www.st.com/STM32