stm32100b_eval.c File Reference

This file provides

More...

#include "stm32100b_eval.h"
#include "stm32_eval.h"
#include "stm32f10x_spi.h"
#include "stm32f10x_i2c.h"

Go to the source code of this file.

Functions

void LM75_LowLevel_DeInit (void)
 DeInitializes the LM75_I2C.
void LM75_LowLevel_Init (void)
 Initializes the LM75_I2C.
void SD_LowLevel_DeInit (void)
 DeInitializes the SD/SD communication.
void SD_LowLevel_Init (void)
 Initializes the SD_SPI and CS pins.
void sFLASH_LowLevel_DeInit (void)
 DeInitializes the peripherals used by the SPI FLASH driver.
void sFLASH_LowLevel_Init (void)
 Initializes the peripherals used by the SPI FLASH driver.
void STM_EVAL_COMInit (COM_TypeDef COM, USART_InitTypeDef *USART_InitStruct)
 Configures COM port.
void STM_EVAL_LEDInit (Led_TypeDef Led)
 Configures LED GPIO.
void STM_EVAL_LEDOff (Led_TypeDef Led)
 Turns selected LED Off.
void STM_EVAL_LEDOn (Led_TypeDef Led)
 Turns selected LED On.
void STM_EVAL_LEDToggle (Led_TypeDef Led)
 Toggles the selected LED.
uint32_t STM_EVAL_PBGetState (Button_TypeDef Button)
 Returns the selected Button state.
void STM_EVAL_PBInit (Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
 Configures Button GPIO and EXTI Line.

Variables

const uint32_t BUTTON_CLK [BUTTONn]
const uint16_t BUTTON_EXTI_LINE [BUTTONn]
const uint16_t BUTTON_IRQn [BUTTONn]
const uint16_t BUTTON_PIN [BUTTONn]
const uint16_t BUTTON_PIN_SOURCE [BUTTONn]
GPIO_TypeDefBUTTON_PORT [BUTTONn]
const uint16_t BUTTON_PORT_SOURCE [BUTTONn]
const uint16_t COM_RX_PIN [COMn] = {EVAL_COM1_RX_PIN, EVAL_COM2_RX_PIN}
GPIO_TypeDefCOM_RX_PORT [COMn] = {EVAL_COM1_RX_GPIO_PORT, EVAL_COM2_RX_GPIO_PORT}
const uint32_t COM_RX_PORT_CLK [COMn] = {EVAL_COM1_RX_GPIO_CLK, EVAL_COM2_RX_GPIO_CLK}
const uint16_t COM_TX_PIN [COMn] = {EVAL_COM1_TX_PIN, EVAL_COM2_TX_PIN}
GPIO_TypeDefCOM_TX_PORT [COMn] = {EVAL_COM1_TX_GPIO_PORT, EVAL_COM2_TX_GPIO_PORT}
const uint32_t COM_TX_PORT_CLK [COMn] = {EVAL_COM1_TX_GPIO_CLK, EVAL_COM2_TX_GPIO_CLK}
USART_TypeDefCOM_USART [COMn] = {EVAL_COM1, EVAL_COM2}
const uint32_t COM_USART_CLK [COMn] = {EVAL_COM1_CLK, EVAL_COM2_CLK}
const uint32_t GPIO_CLK [LEDn]
const uint16_t GPIO_PIN [LEDn]
GPIO_TypeDefGPIO_PORT [LEDn]

Detailed Description

This file provides

Author:
MCD Application Team
Version:
V4.3.0
Date:
10/15/2010

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

© COPYRIGHT 2010 STMicroelectronics

Definition in file stm32100b_eval.c.

STM32F10x Standard Peripherals Library: Footer

 

 

 

      For complete documentation on STM32(CORTEX M3) 32-bit Microcontrollers platform visit  www.st.com/STM32