Common Directory Reference

Files

file  fonts.c [code]
 

This file provides text fonts for STM32xx-EVAL's LCD driver.


file  fonts.h [code]
 

Header for fonts.c.


file  stm32_eval_i2c_ee.c [code]
 

This file provides a set of functions needed to manage the I2C M24CXX EEPROM memory mounted on STM32xx-EVAL board (refer to stm32_eval.h to know about the boards supporting this memory).


file  stm32_eval_i2c_ee.h [code]
 

This file contains all the functions prototypes for the stm32_eval_i2c_ee firmware driver.


file  stm32_eval_i2c_tsensor.c [code]
 

This file provides a set of functions needed to manage the I2C LM75 temperature sensor mounted on STM32xx-EVAL board (refer to stm32_eval.h to know about the boards supporting this sensor). It implements a high level communication layer for read and write from/to this sensor. The needed STM32 hardware resources (I2C and GPIO) are defined in stm32xx_eval.h file, and the initialization is performed in LM75_LowLevel_Init() function declared in stm32xx_eval.c file.


file  stm32_eval_i2c_tsensor.h [code]
 

This file contains all the functions prototypes for the stm32_eval_i2c_tsensor firmware driver.


file  stm32_eval_sdio_sd.c [code]
 

This file provides a set of functions needed to manage the SDIO SD Card memory mounted on STM32xx-EVAL board (refer to stm32_eval.h to know about the boards supporting this memory). It implements a high level communication layer for read and write from/to this memory. The needed STM32 hardware resources (SDIO and GPIO) are defined in stm32xx_eval.h file, and the initialization is performed in SD_LowLevel_Init() function declared in stm32xx_eval.c file. You can easily tailor this driver to any other development board, by just adapting the defines for hardware resources and SD_LowLevel_Init() function.


file  stm32_eval_sdio_sd.h [code]
 

This file contains all the functions prototypes for the SD Card stm32_eval_sdio_sd driver firmware library.


file  stm32_eval_spi_flash.c [code]
 

This file provides a set of functions needed to manage the SPI M25Pxxx FLASH memory mounted on STM32xx-EVAL board (refer to stm32_eval.h to know about the boards supporting this memory). It implements a high level communication layer for read and write from/to this memory. The needed STM32 hardware resources (SPI and GPIO) are defined in stm32xx_eval.h file, and the initialization is performed in sFLASH_LowLevel_Init() function declared in stm32xx_eval.c file. You can easily tailor this driver to any other development board, by just adapting the defines for hardware resources and sFLASH_LowLevel_Init() function.


file  stm32_eval_spi_flash.h [code]
 

This file contains all the functions prototypes for the stm32_eval_spi_flash firmware driver.


file  stm32_eval_spi_sd.c [code]
 

This file provides a set of functions needed to manage the SPI SD Card memory mounted on STM32xx-EVAL board (refer to stm32_eval.h to know about the boards supporting this memory). It implements a high level communication layer for read and write from/to this memory. The needed STM32 hardware resources (SPI and GPIO) are defined in stm32xx_eval.h file, and the initialization is performed in SD_LowLevel_Init() function declared in stm32xx_eval.c file. You can easily tailor this driver to any other development board, by just adapting the defines for hardware resources and SD_LowLevel_Init() function.


file  stm32_eval_spi_sd.h [code]
 

This file contains all the functions prototypes for the stm32_eval_spi_sd firmware driver.


STM32F10x Standard Peripherals Library: Footer

 

 

 

      For complete documentation on STM32(CORTEX M3) 32-bit Microcontrollers platform visit  www.st.com/STM32